-
Kaya Aaen posted an update 6 months, 3 weeks ago
These features indicate that the EL-MVM2 is an effective, time-saving, and precise alternative to conventional antibiotic susceptibility testing platforms currently being used in clinical diagnostics and point-of-care settings.Although nanostructures and oxide dispersion can reduce radiation-induced damage in materials and enhance radiation tolerance, previous studies prove that MoS2 nanocomposite films subjected to several dpa heavy ion irradiation show significant degradation of tribological properties. Even in YSZ-doped MoS2 nanocomposite films, irradiation leads to obvious disordering and damage such as vacancy accumulation to form lamellar voids in the amorphous matrix, which accelerates the failure of lubrication. However, after thermal annealing in vacuum, YSZ-doped MoS2 nanocomposite films exhibit high irradiation tolerance, and their wear duration remains unchanged and the wear rate was nearly three orders of magnitude lower than that of the as-deposited films after 7 dpa irradiation. This successful combination of anti-irradiation and self-adaptive lubrication mainly results from the manipulation of the nanosize and the change of composition by annealing. Compared with the smaller nanograins in as-deposited MoS2/YSZ nanocomposite films, the thermally annealed MoS2 nanocrystals (7-15 nm) with fewer intrinsic defects exhibited remarkable stabilization upon irradiation. Abundant amorphous nanocrystal phases in ion-irradiated thermally annealed films, where each has advantages of their own, greatly inhibit accumulation of voids and crack growth in irradiation; meanwhile, they can be easily self-assembled under induction of friction and achieve self-adaptive lubrication.The sensing and generation of cellular forces are essential aspects of life. Traction force microscopy (TFM) has emerged as a standard broadly applicable methodology to measure cell contractility and its role in cell behavior. While TFM platforms have enabled diverse discoveries, their implementation remains limited in part due to various constraints, such as time-consuming substrate fabrication techniques, the need to detach cells to measure null force images, followed by complex imaging and analysis, and the unavailability of cells for postprocessing. Here we introduce a reference-free technique to measure cell contractile work in real time, with commonly available substrate fabrication methodologies, simple imaging, and analysis with the availability of the cells for postprocessing. In this technique, we confine the cells on fluorescent adhesive protein micropatterns of a known area on compliant silicone substrates and use the cell deformed pattern area to calculate cell contractile work. We validated this approach by comparing this pattern-based contractility screening (PaCS) with conventional bead-displacement TFM and show quantitative agreement between the methodologies. Using this platform, we measure the contractile work of highly metastatic MDA-MB-231 breast cancer cells that is significantly higher than the contractile work of noninvasive MCF-7 cells. PaCS enables the broader implementation of contractile work measurements in diverse quantitative biology and biomedical applications.It is of particular interest to develop new antibacterial agents with low risk of drug resistance development and low toxicity toward mammalian cells to combat pathogen infections. Although gaseous signaling molecules (GSMs) such as nitric oxide (NO) and formaldehyde (FA) have broad-spectrum antibacterial performance and the low propensity of drug resistance development, many previous studies heavily focused on nanocarriers capable of delivering only one GSM. Herein, we developed a micellar nanoparticle platform that can simultaneously deliver NO and FA under visible light irradiation. An amphiphilic diblock copolymer of poly(ethylene oxide)-b-poly(4-((2-nitro-5-(((2-nitrobenzyl)oxy)methoxy)benzyl)(nitroso)amino)benzyl methacrylate) (PEO-b-PNNBM) was successfully synthesized through atom transfer radical polymerization (ATRP). The resulting diblock copolymer self-assembled into micellar nanoparticles without premature NO and FA leakage, whereas they underwent phototriggered disassembly with the corelease of NO and FA. We showed that the NO- and FA-releasing micellar nanoparticles exhibited a combinatorial antibacterial performance, efficiently killing both Gram-negative (e.g., Escherichia coli) and Gram-positive (e.g., Staphylococcus aureus) bacteria with low toxicity to mammalian cells and low hemolytic property. This work provides new insights into the development of GSM-based antibacterial agents.Designing one-dimensional (1D) bimetallic nanomaterials is of great significance for electrochemical nitrogen fixation. RU.521 inhibitor Inspired by this, 1D AuPd nanospikes (AuPd NSs) composed with internal Au nanowire and external Pd nanohumps were fabricated by a flexible low-temperature wet-chemical method. Benefiting from the excellent electron transport efficiency of the 1D material and the accessible surface area provided by the unique nanospike-like structure, AuPd NSs exhibit outstanding nitrogen reduction reaction performance with an NH3 yield rate of 16.9 μg h-1 mg-1cat. and a Faradaic efficiency of 15.9% at -0.3 V under 0.1 M Na2SO4. This work not only provides an effective electrocatalyst for nitrogen fixation technology, but also presents a flexible method for the controlled synthesis of spike-like nanomaterials.
In recent years, increasing health awareness in consumers has motivated breweries to expand their beverage ranges with products with increased biological value. The aim of the present research was to develop probiotic wort-based beverages with grapefruit or tangerine zest essential oil addition.
Wort was produced with 60% Pilsen malt, 20% Vienna malt and 20% Caramel Munich ІІ malt with and without the addition of 0.05% (v/v) grapefruit or tangerine essential oils. It was inoculated with the probiotic yeast strain Saccharomyces cerevisiae var. boulardii Y1. Fermentations were carried out at a constant temperature of 10°C for 5 days. The dynamics of the extract, the alcohol content and the concentration of viable cells were monitored daily. The total phenolic content, phenolic acid and flavonoid phenolic compounds were determined because of their antioxidant activity. The antioxidant activity was determined by radical scavenging assay (DPPH) and ferric reducing antioxidant power (FRAP). A descriptive organoleptic evaluation of the final beverages was performed.