• Linnet Hahn posted an update 6 months ago

    For the first time, this experiment demonstrated the feasibility of the production, collection, and purification of 47Ca through isotope harvesting for the generation of 47Sc for nuclear medicine applications.Three-dimensional (3D) printing is a very flexible process to design various objects of original shapes. Previous works highlighted the preparation of new multimaterials composed of an original sandwich structure made of the ethylene vinyl acetate copolymer containing 30 wt % of aluminum trihydroxide in which a hydrogel phase made of agar and vermiculite was incorporated. This original material revealed an extremely low heat release rate (HRR) (with a reduction of 86 and 64% with regard to the peak of the HRR and total heat release, respectively, when compared to the same sample without hydrogel filling) during its heat exposure at 50 kW/m2 according to the mass loss cone calorimetry test. However, the time to ignition (TTI) of this material was not improved. This work consequently focuses on delaying the time to ignition of this hydrogel sandwich 3D-printed multimaterial. Solution consists in depositing by pulsed DC magnetron sputtering a low-emissivity thin coating on the exposed skin surface. This coating reflects most of the infrared rays responsible for heat absorption and thus delays the ignition of the underlying material. The thermal resistance performances of this coated sandwich 3D-printed multimaterial were evaluated, and a mechanism of action was proposed to explain the dramatic enhancement of the properties.Basic magnesium sulfate cement is a type of green high-performance cementitious material. In order to exert its performance advantages and expand its application field, it is urgent to study the problem of steel corrosion in basic magnesium sulfate cement concrete (BMSCC). In this paper, linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS) were used to study the corrosion behavior of steel bars in different strength grades of BMSCC in seawater. Based on the relationship between the corrosion current density and the immersion time, the corresponding time-varying model was obtained. The LPR and EIS results show that the corrosion potential and polarization resistance of steel bars in BMSCC decreased with the immersion time in the seawater environment. The fitting analysis indicated concordance between the corrosion rates with the logarithmic function time-varying model. Furthermore, the cracking time of the protective layer of BMSCC was analyzed based on the cracking time prediction model of Portland cement concrete and the mechanical properties of BMSCC.Maleic acid underwent alternate copolymerization with diallylaminomethylphosphonic acid·HCl and a cross-linker to give a new pH-responsive resin. Methylene blue (MB) removal from its 3000 ppm solution by the resin at pH 7 followed second-order kinetics with an Ea of 34.8 kJ mol-1. MB removal was achieved very fast (10 min), attaining over 98.5% at 328 K. The qe obtained using MB concentrations in the range 100-8000 ppm fitted the Langmuir nonlinear isotherm model to give ΔGo, ΔHo, and ΔSo values of ≈ -21 kJ, 36.5 kJ mol-1, and 185 J mol-1 K-1, respectively. The resin is a superadsorbent with a qmax value of 2445 mg g-1. The adsorbent also removed 97% Pb(II) within 5 min from its 10 000 ppb solution. The resin reduced the Pb(II) concentration from 200 to 3.8 ppb. The resin also demonstrated its ability to remove contaminants from industrial wastewater, reducing priority metal contaminants to ppb and sub-ppb levels. The resin can be recycled with stable efficiency. CP21 ic50 The outstanding performance places the resin in a top position in a list of recently reported sorbents.The traditional biological denitrification process has the problems of low removal rates and lack of a carbon source when treating wastewater with high ammonia nitrogen concentration and a low carbon-nitrogen ratio. Based on a bio-electrochemical system (BES), a novel carbon cloth bipolar plate multicompartment electroenhanced bioreactor (CBM-EEB) system was constructed. In this study, nitrogen removal efficiency and enrichment of functional bacteria using CBM-EEB under different voltage conditions were investigated. The results from next-generation sequencing indicated that the CBM-EEB included heterotrophic nitrification and aerobic denitrification (HNAD) and was dominated by heterotrophic nitrification aerobic denitrifying bacteria (HNADB). The applied voltage was confirmed as having the ability to regulate the microbial community structure and abundance of functional genes, thereby further enhancing the nitrogen removal efficiency of the system. The total nitrogen removal efficiency was 77.70 ± 1.14, 87.1. This study highlighted the feasibility of CBM-EEB to enhance the HNAD reaction and the response of wastewater with a low C/N ratio to enhance the abundance of microbial bacteria and their functional gene abundance.In this work, a biogenic-mediated approach is successfully used to synthesize a novel heterogeneous Cs2O-MgO/MPC basic nanocomposite. For the first time, the established technicality employs pomegranate seed extract that gives a green capping fuel and reducing mediators during an aqueous solution combustion process of metal ion precursors. The synthesized nanocomposites were identified by X-ray diffraction, Fourier transform infrared, N2 isotherms, field emission scanning electron microscopy, and CO2-TPD analyses. The transesterification process of olive oil was used to evaluate the catalytic performance. The nanocomposite displayed outstanding catalytic efficiency stemming from the boosting of the reactant and product diffusion. The transesterification activity and the optimization design were assessed by applying the response surface methodology. Based on the experimental tests, the finest experimental conditions with a biodiesel yield of 96.1% are 4 h, 4% catalyst amount, an oil/methanol ratio of 115, and a temperature of 65 °C. The predicted optimal conditions based on the statistical model are 6 h contact time, 5.2 % catalyst dose, 65 °C reaction temperature, and 115 oil/methanol molar ratio, attaining a biodiesel yield of 95.18%. The catalyst reusability has been performed almost continuously up to four cycles, with no loss of the active constituents. The obtained biodiesel demonstrated characteristics close to those of international standards of biodiesel. Besides, the process employed in this study demonstrated significant potential for further development and commercialization and is cheaper than the refined vegetable oil used in traditional approaches of biodiesel manufacturing.

All content contained on CatsWannaBeCats.Com, unless otherwise acknowledged,is the property of CatsWannaBeCats.Com and subject to copyright.

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account