• Honore Jain posted an update 6 months, 3 weeks ago

    The activation energy value of 7.610 kJ/mol further revealed that the adsorption process is dominated majorly by physical adsorption. The removal of MZN onto TWAC was best described by the non-linear adsorption isotherm and kinetics model.Copper and stainless steel electrodes were used in batch electrochemical coagulation (BECC) for the treatment of real textile wastewater using 16 electrode combinations. Out of 16 Cu-SS and SS-Cu combinations (eight combinations each), only 4SS and 3SS-1Cu electrodes operated at cell voltage of 18 V and current density of 180 A/m2 gave maximum color and chemical oxygen demand (COD) removals. The COD removal was observed to be 89.37% for 4SS and 72.34% for 3SS 1Cu electrodes from CODo 3,012 mg/L. Color removal was 97% and 98% from its initial value of 1,000 Pt-Co unit for 4SS and 3SS-1Cu combinations. Water quality parameters like total dissolved solids, chloride, nitrate, phosphate, and sulphate reduced from their initial values while using all 4SS and 3SS-1Cu electrode arrangements. Other control factors exercised for optimal operations were ECC floc settling pattern and sludge volume index (SVI). SVI values were found to be less then 100 mL/g for both electrode combinations.Tannins are recalcitrant polyphenolic molecules that resist microbial attack. Their main environmental damage is due to their low biodegradability. This work aims to investigate the photo-catalytic degradation of two commercial tannin extracts, chestnut (hydrolysable tannin) and mimosa (condensed tannin). Voruciclib ic50 The experiments were carried out under UV-light irradiation in a continuous-flow reactor using titanium dioxide (TiO2) immobilized on cellulosic fibers. It was highlighted that photo-catalytic degradation is unfavourable in acidic medium and when the pH is too high (pH above 12); it reaches its maximum efficiency at pH 7.5 (99 and 97% for chestnut and mimosa, respectively). Nearly complete degradation of tannins requires an irradiation period of 6 h. The process efficiency is inversely affected by the concentration of tannins essentially above 75 mg/L for chestnut and 60 mg/L for mimosa. Above 240 mL/min, any increase in feed flow negatively affects the performance of the process. Furthermore, a significant decrease of treatment efficiency was seen when increasing the concentration of ethanol and salts in the medium. Obtained results suggest that UV-light irradiation in a continuous-flow photo-reactor using immobilized TiO2 may be considered as an adequate process for the treatment of water containing recalcitrant tannin molecules.Steroidal hormones such as estriol (E3), are resistant to biodegradation; hence their removal by conventional treatment systems (aerobic and anaerobic) facilities is limited. These substances are detected in surface water, and present risks to the aquatic ecosystem and humans via potential biological activity. Photochemical treatments can be used to remove E3; however, just a few studies have analyzed the kinetics, intermediates, and E3 degradation pathways in natural surface water. In this study, the behavior of E3 under ultraviolet irradiation associated with H2O2, O3 or TiO2 was investigated to determine the degradation potential and the transformation pathways in reactions performed with a natural surface water sample. E3 degradation kinetics (200 ppb) fitted well to the pseudo-first-order kinetics model, with kinetic constant k in the following order kUV/O3 > kUV/TiO2 > kUV/H2O2 > kUV. The mechanism of degradation using different advanced oxidative processes seemed to be similar and 12 transformation byproducts were identified, with 11 of them being reported here for the first time. The byproducts could be formed by the opening of the aromatic ring and addition of a hydroxyl radical. A possible route of E3 degradation was proposed based on the byproducts identified, and some of the byproducts presented chronic toxicity to aquatic organisms, demonstrating the risks of exposure.Cadmium contamination in industrial wastewater is an environmental issue posing a great threat to human and animal life. However, the available methods for the removal of cadmium at lower concentrations are limited. Such processes are often accompanied by sludge formation and lead to heavy metal wastage. This paper focuses on the application of an electrosorption process using modified activated carbon felt (MACF) electrodes for the removal and recovery of lower concentration of cadmium from a simulated wastewater sample without sludge formation. Activated carbon felt (ACF) electrodes were treated with 20% HNO3 for removing surface impurities and improving the surface area. The effect of the electrode modification was analyzed by performing various characterizations including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and cyclic voltammetry. The adsorption isotherm and kinetic models have also been studied. The effect of operating parameters including pH, voltage, initial concentration and time were analyzed and optimized using Box-Behnken design and were obtained as 6.42, 1.44 V, 0.50 mg/L and 131.51 min respectively. During the regeneration of electrodes, a concentrated cadmium solution of 18.55 mg/L was obtained, which showed the possibility of cadmium recovery. The maximum cadmium removal was 60.60% at the optimized conditions, revealing the significance of electrosorption for heavy metal treatment.This study aims to investigate the feasibility of treating olive mill waste water (OMWW) by activated sludge pilot (AS) after its high dilution (1%) by urban waste water (UWW) and to study the effect of polyphenol compounds on the biomass during the treatment. Specific oxygen uptake rate (SOUR), mixed liquor volatile suspended solids (MLVSS), chemical oxygen demand (COD) and total polyphenols, were followed up over 100 days. In spite of the polyphenols’ high concentration (up to 128 mg·L-1), successful biomass growth of 7.12 g MLVSS.L -1 and activity were achieved. Most of the bacteria (Pseudomonas sp., Klebsiella oxytoca, Citrobacter fereundii, Escherichia coli and Staphylococcus sp.) and fungi (Trichoderma sp., Rhizopus sp., Aspergillus niger, Penicillium sp., Fusarium sp., Alternaria) identified in the aerobic basin during the stabilization stage were known to be resistant to OMWW and showed effective adaptation of the biomass to polyphenols in high concentration. COD and polyphenols were highly eliminated (90%, 92% respectively).

All content contained on CatsWannaBeCats.Com, unless otherwise acknowledged,is the property of CatsWannaBeCats.Com and subject to copyright.

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account