-
Hart Lang posted an update 6 months, 3 weeks ago
The technological approach led to a satisfactory process yield (71.5%), encapsulation efficiency (99.9%), and stability. The in vitro water dissolution rate of the bioactive compounds appeared to be improved with respect to the extract, suggesting higher feasibility in the manufacturing and administration; even the in vitro biological activity of the produced multi-component AJEP3 was clearly enhanced.
To investigate antibody production in asymptomatic and mild COVID-19 patients.
Sera from asymptomatic to severe COVID-19 patients were collected. Microneutralization (MN), fluorescence immunoassay (FIA), and enzyme-linked immunosorbent assay (ELISA) were performed.
A total of 70 laboratory-confirmed COVID-19 patients were evaluated, including 15 asymptomatic/anosmia, 49 mild symptomatic, and 6 pneumonia patients. The production of the neutralizing antibody was observed in 100% of pneumonia, 93.9% of mild symptomatic, and 80.0% of asymptomatic/anosmia groups. All the patients in the pneumonia group showed high MN titer (≥180), while 36.7% of mild symptomatic and 20.0% of asymptomatic/anosmia groups showed high titer (
< 0.001). Anti-SARS-CoV-2 antibodies could be more sensitively detected by FIA IgG (98.8%) and ELISA (97.6%) in overall. For the FIA IgG test, all patients in the pneumonia group exhibited a high COI value (≥15.0), while 89.8% of mild symptomatic and 73.3% of asymptomatic/anosmia groups showed a high value (
= 0.049). For the ELISA test, all patients in the pneumonia group showed a high optical density (OD) ratio (≥3.0), while 65.3% of mild symptomatic and 53.3% of asymptomatic/anosmia groups showed a high ratio (
= 0.006).
Most asymptomatic and mild COVID-19 patients produced the neutralizing antibody, although the titers were lower than pneumonia patients. ELISA and FIA sensitively detected anti-SARS-CoV-2 antibodies.
Most asymptomatic and mild COVID-19 patients produced the neutralizing antibody, although the titers were lower than pneumonia patients. ELISA and FIA sensitively detected anti-SARS-CoV-2 antibodies.At present, De Man, Rogosa and Sharpe (MRS) broth is the medium of choice for promoting bacteriocin production. However, this medium is expensive and not applicable for large-scale production. Therefore, a low-cost and high-efficiency culture medium for bacteriocin Lac-B23 production by Lactobacillus plantarum J23 was developed. First, the effects of the composition of MRS broth on bacteriocin Lac-B23 production and bacterial growth were researched by a one variable at a time approach. Then, a Plackett-Burman design was used to screen significant components for production. Finally, the steepest ascent and central composite designs were used to obtain an optimum medium. The final composition of the modified MRS was much simpler than MRS broth, and the modified MRS contained only glucose, yeast extract, dipotassium phosphate, manganese sulfate monohydrate, Tween 80 and sodium acetate anhydrous. The highest bacteriocin Lac-B23 production reached 2560 activity units (AU)/mL in the modified MRS, which is nine times higher than that in MRS broth (280 AU/mL). Meanwhile, the cost per liter of the modified MRS (8.56 Ren Min Bi (RMB)/L) is 34.70% the cost of MRS broth (13.11 RMB/L), and the cost per arbitrary units of bacteriocin Lac-B23 in the modified MRS is approximately fourteen times more convenient (3.34 RMB/106 AU) than in the MRS broth (46.82 RMB/106 AU).Rapid and sensitive screening of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is essential to limit the spread of the global pandemic we are facing. Quantitative real-time reverse transcription-polymerase chain reaction (qRT-PCR) is currently used for the clinical diagnosis of SARS-CoV-2 infection using nasopharyngeal swabs, tracheal aspirates, or bronchoalveolar lavage (BAL) samples. Despite the high sensitivity of the qRT-PCR method, false negative outcomes might occur, especially in patients with a low viral load. Here, we developed a multiplex qRT-PCR methodology for the simultaneous detection of SARS-CoV-2 genome (N gene) and of the human RNAse P gene as internal control. We found that multiplex qRT-PCR was effective in detecting SARS-Cov-2 infection in human specimens with 100% sensitivity. Notably, patients with few copies of SARS-CoV-2 RNA ( less then 5 copies/reaction) were successfully detected by the novel multiplex qRT-PCR method. Finally, we assessed the efficacy of multiplex qRT-PCR on human nasopharyngeal swabs without RNA extraction. Collectively, our results provide evidence of a novel and reliable tool for SARS-CoV-2 RNA detection in human specimens, which allows the testing capacity to be expanded and the RNA extraction step to be bypassed.Ultrasound detection is one of the major components of photoacoustic imaging systems. Advancement in ultrasound transducer technology has a significant impact on the translation of photoacoustic imaging to the clinic. Here, we present an overview on various ultrasound transducer technologies including conventional piezoelectric and micromachined transducers, as well as optical ultrasound detection technology. We explain the core components of each technology, their working principle, and describe their manufacturing process. PGE2 order We then quantitatively compare their performance when they are used in the receive mode of a photoacoustic imaging system.The aim of this study was to assess the possibility of using furniture waste for smokeless fuel production using the pyrolysis process. Four types of wood-based wastes were used in the pyrolysis process pine sawdust (PS), chipboard (CB), medium-density fiberboard (MDF), and oriented strand board (OSB). Additionally, the slow and fast types of pyrolysis were compared, where the heating rates were 15 °C/min and 100 °C/min, respectively. Chemical analyses of the raw materials and the pyrolysis product yields are presented. A significant calorific value rise was observed for the solid pyrolysis products (from approximately 17.5 MJ/kg for raw materials up to approximately 29 MJ/kg for slow pyrolysis products and 31 MJ/kg for fast pyrolysis products). A higher carbon content of char was observed in raw materials (from approximately 48% for raw materials up to approximately 75% for slow pyrolysis products and approximately 82% for fast pyrolysis products) than after the pyrolysis process. This work presents the possibility of utilizing waste furniture material that is mostly composed of wood, but is not commonly used as a substrate for conversion into low-emission fuel.
Please follow & like us :)
All content contained on CatsWannaBeCats.Com, unless otherwise acknowledged,is the property of CatsWannaBeCats.Com and subject to copyright.